Rutile Titanium Dioxide (TiO2)

Rutile Titanium Dioxide Made in Malaysia — No EU Anti-Dumping Duty

If you are looking for rutile titanium dioxide for your coatings, plastics, masterbatch or inks, you have found a supplier that removes the anti-dumping cost from the equation. We are IKHLAS TITANIUM DIOXIDE (MALAYSIA) SDN. BHD., and we manufacture all eight of our titanium dioxide grades in the rutile crystal form at our facility in Teluk Kalong, Terengganu, Malaysia. Because our rutile titanium dioxide is made in Malaysia, it is not subject to the EU anti-dumping duty that applies to Chinese-origin TiO2. You get high-quality rutile pigment without the extra import cost. Tell us your application and we will recommend the right grade and send you a quote.

Why Rutile Is the Crystal Form You Want

Titanium dioxide comes in two crystal forms, and rutile is the one that matters for industrial use. Rutile titanium dioxide scatters light more strongly than anatase, which means higher hiding power, better whiteness and stronger weather resistance. That is why virtually every serious coatings, plastics and inks formula is built on rutile TiO2, not anatase. We make our entire product line in rutile form precisely because it is what industrial buyers need. When you buy rutile titanium dioxide from IKHLAS, you are buying the crystal form that delivers the performance your product depends on.

Eight Rutile Grades for Every Application

We do not sell one grade and hope it fits. We manufacture eight rutile titanium dioxide grades, each engineered for a specific use:

  • For coatings: M-996A, M-895C and M-510 — high hiding power, high gloss and excellent weatherability for architectural, industrial and powder coatings.
  • For plastics & masterbatch: M-210, M-R68 and R-88 — heat-stable, low-volatile and easy to disperse, ideal for masterbatch, PVC films and colored sheets.
  • For inks: M-52 — high gloss and high hiding power for printing inks and high-gloss coatings.
  • General purpose: M-R69 — a versatile rutile grade for paint, ink, paper, rubber and plastic.

Every grade has a full TDS, so you can check the TiO2 content, whiteness, oil absorption and surface treatment before you order. See our Products page for the complete range.

Two Process Lines, One Rutile Standard

Our production runs both the sulfate process and the chloride process. Both produce true rutile titanium dioxide, but they suit different needs. Chloride-process rutile has lower impurities and better weatherability, which suits premium coatings that must stay bright outdoors. Sulfate-process rutile is more cost-effective and covers a broad range of uses. Because we run both, we can recommend the process and grade that fits your formula and your budget, instead of pushing a single technology.

Quality You Can Verify on the TDS

We put our numbers in writing. Our R-88 grade delivers a color difference of ΔE ≤ 0.5 and relative scattering power of 95–105%. Our M-210 grade reaches 96.5% TiO2 with only 0.2% volatile matter. Our rutile grades carry ISO R1 or R2 classification, depending on the application. When you buy rutile titanium dioxide from IKHLAS, the key specs are printed on the TDS, not promised over the phone.

A Manufacturer, Not a Middleman

We are the manufacturer, so you deal directly with the source. That gives you stable supply, transparent per-ton pricing and full traceability — a real factory, a company registration number (202601036582) you can verify, and documents (TDS, SDS, CAS and REACH) your compliance team can check. We also offer free samples, so you can confirm a grade performs in your own formula before you commit to a full order.

Get Your Rutile Titanium Dioxide Quote

Tell us your application, the grade you are considering and your monthly volume, and we will reply with a transparent per-ton quote. You can also request a free sample to test in your own formula.

The Ultimate Guide to Rutile Titanium Dioxide

This guide answers the questions industrial buyers ask most often about rutile titanium dioxide — what it is, how it differs from anatase, and how to choose the right rutile grade for your application.

What Is Rutile Titanium Dioxide?

Rutile titanium dioxide is the most common and most important form of titanium dioxide pigment. It is a white powder in which the titanium dioxide crystals are arranged in the rutile structure, the most stable and most light-scattering crystal form. This structure is what gives rutile TiO2 its high hiding power, high brightness and strong weather resistance. It is the pigment of choice for nearly all industrial applications, from architectural paint to plastics and inks.

What Is the Difference Between Rutile and Anatase Titanium Dioxide?

Both are forms of titanium dioxide, but they behave differently. Rutile scatters light more strongly, so it gives higher hiding power, better whiteness and greater weather resistance. Anatase is softer and more reactive, which limits it to a few special uses such as some photocatalysis and less demanding applications. For coatings, plastics, inks and paper, rutile is the clear choice. All eight of our grades are rutile type, because that is what industrial buyers need.

Why Is Rutile Better Than Anatase for Coatings?

Coatings need high hiding power and long-term weather resistance, and rutile delivers both. Because rutile scatters light more efficiently than anatase, you need less pigment to achieve the same opacity, which can actually lower your formula cost. Rutile is also far more resistant to chalking and degradation under sunlight, so outdoor coatings stay bright longer. This is why virtually every architectural and industrial coating is built on rutile titanium dioxide.

What Is the Difference Between Sulfate and Chloride Rutile Titanium Dioxide?

Both processes produce true rutile titanium dioxide, but the results differ slightly. Chloride-process rutile generally has lower impurity levels, brighter whiteness and better weatherability, so it is preferred for premium coatings. Sulfate-process rutile is more cost-effective and performs well across a broad range of uses. Both are genuine rutile pigments with high hiding power. Your choice depends on whether your application demands premium weather performance or cost efficiency. At IKHLAS we make both, so we can advise you honestly.

Which Rutile Grade Should I Use for My Application?

It depends on what you make. For coatings, our M-996A, M-895C and M-510 grades cover architectural, industrial and powder coatings. For plastics and masterbatch, M-210, M-R68 and R-88 provide heat stability and easy dispersion. For inks, M-52 offers high gloss and high hiding power. For a versatile general-purpose grade, M-R69 works across paint, ink, paper, rubber and plastic. Tell us your application and target specs, and we will recommend the specific grade and send a sample for you to test.

What TiO2 Content Should I Look For in a Rutile Grade?

Most rutile titanium dioxide pigments have a TiO2 content in the range of roughly 93% to 97%. The exact content depends on the grade and its surface treatment. Our grades range from 93% to 97% TiO2. For example, M-210 reaches 96.5% TiO2, while M-996A is 95% and M-895C is 94%. Higher TiO2 content generally means more pigment strength per unit weight, but the right choice also depends on the surface treatment and your application.

What Surface Treatments Do Your Rutile Grades Have?

We apply inorganic surface treatments — alumina, zirconia, or a combination — and organic treatments to our rutile grades. These treatments control dispersion, weather resistance and processing behavior. Alumina treatment improves dispersion and weather resistance, while organic treatment helps wetting in plastic and masterbatch systems. Each grade’s TDS lists its exact surface treatment, so you can compare grades precisely.

What Particle Size Is Best for Rutile Titanium Dioxide?

The optimal particle size for a rutile pigment is around 0.2 to 0.3 microns, because that is where light scattering — and therefore hiding power — is highest. Our rutile grades are milled and classified to the right particle size for their intended application, and the surface treatment then controls how they disperse in your system. If you need a specific particle size for a special application, tell us and we will advise.

What Whiteness and Undertone Should I Expect?

Whiteness describes how bright and white the pigment appears, and undertone describes the subtle blue or yellow cast. Premium grades deliver high whiteness with a blue undertone, which reads as cleaner and brighter to the eye. Our high-end grades such as R-88 deliver high whiteness with a blue undertone, which is what buyers look for in premium masterbatch and white goods. The exact whiteness value for each grade is on its TDS.

What Is the CAS Number for Rutile Titanium Dioxide?

The CAS number for titanium dioxide — including rutile — is 13463-67-7. This is the standard identifier you will see on SDS, MSDS and customs documents. When your compliance team or customs broker asks for the CAS number of the product you are buying, this is the one to provide. It applies to both the sulfate and chloride process.

Is Your Rutile Titanium Dioxide Subject to EU Anti-Dumping Duty?

No. The EU anti-dumping duty on titanium dioxide applies to Chinese-origin product, currently up to 0.74 EUR/kg, with an anti-absorption review that could raise it further. Because our rutile titanium dioxide is manufactured in Malaysia, it is not subject to this duty. When you buy from IKHLAS, you avoid that extra import cost. This is a key reason European buyers choose Malaysian-made rutile TiO2 over Chinese-origin imports.

How Do I Get a Sample or a Quote?

Send an email to info@tio2products.com with your application, the grade you are considering and your monthly volume. We will reply with a transparent per-ton quote. We also offer free samples, so you can test the rutile grade in your own formula before you commit. A sample test is the fastest way to confirm the grade meets your specification.

More Frequently Asked Questions

Below are more questions we hear from buyers who are selecting a rutile grade. If your question is not covered, contact us and we will answer it directly.

How Do I Test Whether a Rutile Grade Meets My Spec?

The reliable way is to run the grade in your own formula and check the properties that matter to you — hiding power, gloss, dispersion, whiteness and process stability. You can also compare the TDS values against your current grade. We recommend you request a sample and run a side-by-side comparison with what you use today. If you need guidance on what to test, contact us and we will help.

How Does Rutile Titanium Dioxide Improve Hiding Power?

Rutile titanium dioxide has a higher refractive index than almost any other white pigment, which means it bends and scatters light more strongly. This high light scattering is exactly what creates hiding power — the ability to cover the substrate underneath. Because rutile scatters light so efficiently, a smaller amount of pigment achieves strong opacity, which is why rutile is the standard in high-performance coatings.

What Is Relative Scattering Power and Why Does It Matter?

Relative scattering power measures how strongly a pigment scatters light compared to a reference standard, usually expressed as a percentage around 100%. A value of 95–105%, like our R-88 grade, means the pigment performs consistently close to the reference. This matters because it tells you the grade will deliver predictable hiding power batch after batch, which keeps your finished product consistent.

Does Rutile Titanium Dioxide Yellow in Plastics?

A well-made rutile grade should not yellow during plastic processing, provided you choose the right grade. Yellowing usually comes from impurities, poor thermal stability or excessive volatile matter. Our plastic and masterbatch grades — M-210, M-R68 and R-88 — are engineered for heat stability and low volatile content, which minimizes yellowing and odor at high processing temperatures.

What Is Volatile Matter and Why Should I Check It?

Volatile matter is the small amount of moisture and other volatiles in the pigment. In plastics and masterbatch, high volatile content can cause bubbles, odor or yellowing during high-temperature processing. Our grades keep volatile matter low — M-210 is just 0.2% — which helps your process run cleanly. This is a spec worth checking on the TDS for any plastic or masterbatch application.

What Is the Difference Between ISO R1 and R2 Classification?

ISO 591 classifies titanium dioxide pigments into types. R1 grades have a lower pigment content and are often used where high hiding power is less critical, while R2 grades have higher TiO2 content and stronger pigment properties. Our grades carry R1 or R2 classification depending on their intended use — for example, our plastic grades M-R68 and R-88 are R1, while most coating grades are R2. The classification is listed on each TDS.

Can Rutile Titanium Dioxide Be Used in Food-Contact Applications?

Rutile titanium dioxide is generally intended for industrial uses such as coatings, plastics, inks and paper. For food-contact or other regulated applications, the specific grade and its compliance documentation matter. Some of our grades, such as R-88, can be used in food-contact applications when accompanied by the appropriate documents. If you have a regulated end-use, tell us your exact application and we will confirm what we can support.

How Does Rutile Compare to Other White Pigments?

Rutile titanium dioxide has the highest refractive index and hiding power of all commercial white pigments, which is why it outperforms alternatives such as zinc oxide, lithopone and calcium carbonate. Where other white pigments provide bulk or cost reduction, rutile TiO2 provides the actual opacity and whiteness. In many formulas, rutile is used as the primary opacifying pigment, with extenders added to control cost.

Do You Offer Both Sulfate and Chloride Rutile Grades?

Yes. Our sulfate-process rutile grades are M-996A, M-R68, R-88 and M-52, and our chloride-process rutile grades are M-895C, M-510 and M-210. M-R69 is a general-purpose grade. Having both process lines means we can recommend the right grade for either premium weather performance or cost efficiency, without bias toward a single technology.

Can I Get a TDS Before I Order?

Yes. Every IKHLAS grade has a TDS available, and you can download it from our Documents page or request it by email. Reviewing the TDS before you order lets you confirm the TiO2 content, whiteness, oil absorption, surface treatment and classification of the grade you are considering, so there are no surprises after the order arrives.

What Packaging Do You Offer for Rutile Titanium Dioxide?

We package in 25 kg paper bags and 500 kg or 1000 kg jumbo bags, palletized for sea freight. The packaging protects the powder from moisture and contamination in transit. If you need a specific bag format or labeling for your warehouse or production line, tell us and we will accommodate where possible.

How Do You Ship Rutile Titanium Dioxide to Europe?

We ship by sea to buyers across Europe, including Germany, Italy, Spain, Greece and the UK. Because our rutile titanium dioxide is made in Malaysia, your shipment avoids the EU anti-dumping duty on Chinese-origin product regardless of which European country it enters. Tell us your destination port and monthly volume, and we will give you a shipping plan and lead time.

What Is Your Minimum Order Quantity?

We support both trial orders and full container loads. The exact minimum depends on the grade and destination, so the best approach is to tell us your monthly volume and we will confirm what works. If you want to start small, ask us about a sample or trial quantity first, and we will help you get started.

Still Have Questions?

If your question is not answered here, contact us at info@tio2products.com and we will answer it directly. Our team helps coatings, plastics, masterbatch and inks buyers select the right rutile titanium dioxide grade every day, and we are glad to help you too.

Scroll to Top